VANDAL REGULAR DOME SIZED IN/OUTDOOR PTZ CAMERA, X10 OPTICAL ZOOM
[PT 980]

Available Options:
[Options]:	No OptionHeater (+$30.00)
[Power Supply]:	Not IncludedAC24V 50VA w/ LED (+$16.00)
[Remote Control]:	NoneRS-485 to RS-232 Converter (+$45.00)

Item Description Camera Specifications CCD Sensor : 1/4" Interline Transfer CCD Zoom Magnification : x10 Optical Zoom, x10 Digital Zoom(combine x100 Zoom) Day & Night Function Various Focus Mode : Auto-Focus / Manual Focus / Semi-Auto Focus Independent & Simultaneous Camera Characteristic Setup in Preset operation Powerful Pan/Tilt Functions Max. 360°/sec high speed Pan/Tilt Motion Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest path. As a result, time to target view is reduced dramatically and the video on the monitor is very natural to watch. For jog operation using a controller, since ultra slow speed 0.05°/sec can be reached, it is very easy to locate camera to desired target view. Additionally it is easy to move camera to a desired position with zoom-proportional pan/tilt movement. Preset, Pattern, Swing, Group, Privacy Mask and More... Max. 127 Presets are assignable and characteristics of each preset can be set up independently, such as White Balance, Auto Exposure, Label and so on. Max. 8 set of Swing action can be stored. This enables to move camera repetitively between two preset positions with designated speed. Max. 4 of Patterns can be recorded and played back. This enables to move camera to follow any trajectory operated by joystick as closely as possible. Max. 8 set of Group action can be stored. This enables to move camera repetitively with combination of preset or Pattern or Swing. A Group is composed of max. 20 entities of Preset/Pattern/Swings. Privacy Masks are assignable, not to intrude on other's privacy. (4 Privacy Zones) PTZ(Pan/Tilt/Zoom) Control With RS-485 communication, max. 255 of cameras can be controlled at the same time. Pelco-D or Pelco-P protocol can be selected as a control protocol in the current version of firmware. OSD(On Screen Display) OSD Menu is provided to display the status of camera and to configure the functions interactively. The information such as ID, Pan/Tilt Angle, Alarm Input and Preset can be displayed on screen. Alarm I/O Functions 4 alarm sensor Inputs are available. To reject external electric noise and shock perfectly, alarm sensor Input is decoupled with photo coupler. The signal range of sensor input is from DC 5.0 to 12.0 volts to adopt various applications. If an external sensor is activated, camera can be set to move to the corresponding Preset position. Reserved Presets for Special Purpose Most camera characteristics can be set up easily and directly with reserved preset, not entering into OSD menu. For more information, refer to "Reserved Preset" in this manual. Easy Installation and Perfect Outdoor Environment Compatibility Fans and heaters are built-in in camera for cold and hot temperature environment. Also idealistic mechanical design protects camera from water and dust. (IP66 when installed properly with well mount bracket only) It is easy to install and repair camera PT TP 980 Camera CCD 1/4” Interline Transfer CCD Max. Pixels 811(H) x 508(V) 410K Effective Pixels 768(H) x 494(V) 380K Horizontal Resolution 500 TV Line(Color) / 570 TV Line(B/W) S/N Ratio 50 dB (AGC Off) Zoom x10 Optical Zoom x10 Digital Zoom Focal Length F1.8, f="3.8~38mm" Min. Illumination 0.7 Lux (Color) / 0.02 Lux (B/W), 50 IRE Day & Night Auto / Day / Night (ICR) Focus Auto / Manual / SemiAuto Iris Auto / Manual Shutter Speed x128 ~ 1/120,000 sec. AGC Normal / High / Off White Balance Auto / Manual (Red, Blue, Gain Adjustable) BLC Low / Middle / High / Off Flickerless Selectable SSNR Low / Middle / High / Off Pan / Tilt Range Pan : 360° (Endless) Tilt : 180°(Auto-Flip), 95° (Normal) Pan / Tilt Speed Preset : 360°/sec Manual : 0.05 ~ 360°/sec (proportional to zoom) Swing : 1~180°/sec Preset 127 Preset (Label, Camera Image Setting) Pattern 4 Pattern, 1200 commands (about 5 minute) / Pattern Swing 8 Swing Group 8 Group (20 action entities per Group) Other Functions Auto Flip, Auto Parking, Power Up Action etc. General Communication RS-485 Protocol Pelco-D, Pelco-P selectable Privacy Zone 4 Zone Alarm Input 4 Input OSD Menu / PTZ information etc Rated Power AC 24V Operating Temp. 32°F ~ 104°F(0°C~40°C) w/o Heater & Blower -22°F ~ 122°F (-30°C ~ 50°C) w/ Heater & Blower Dimension Dome : Ø4.53 in Surface Mount : Ø6.61 in × 6.32 (H) in Ceiling Mount : Ø7.48 in × 7.81 (H) in Wall Mount : Ø7.48 in × 10.35 (H) in × 11.7 (W) in Some Images may be used for illustration purposes only and does not represent actual products.