1/2 HP Centrifugal Water Pump H.D.

1/2 HP Centrifugal Water Pump H.D. [01000411]

Features:

- Flow: 40L/Min - Metal Housing - Suction Max : 9M - Heavy Duty Motor - Voltage:115/60 Hz - Input Power 370 Watts - 1/2 Horse Power Motor - Discharge Head Max: 40M - Nozzle Dimension Inlet/Outlet 1" x 1"

1/2 HP Submersible Clear Water Pump [06000509]

Features:

- Max Depth:5m - Max Height:5m - Heavy Duty Motor - Voltage:115/60 Hz - Power Rated: 350 W - Max Grain Size: 35mm - Approximately 18 Ft Cord Length - Max Pump Rate:1200 Gallon Per Hour Rating - Quality: Construction Engineered Resin Body - Built In Automatic Shut Off Mechanism (Will Shut Off Pump When Water Is All Drained Out)

1/2 HP Submersible Dirty Water Pump (A) [06000611]

Features:

- Max Depth: 5m - Max Height: 5m - Heavy Duty Motor - Voltage:115/60 Hz - Power Rated: 400 W - Max Grain Size: 35mm - Approximately 25 Ft Cord Length - Diameter Of Pipe 1", 1-1/2", 1-1/4" - Max Pump Rate:7500 Per Hour Rating - Quality: Construction Engineered Resin Body - Built In Automatic Shut Off Mechanism (Will Shut Off Pump When Water Is All Drained Out)

3/4 HP Electric Water Pump [09067111]

Heavy Duty 3/4 HP 2-1/2" Centrifugal Water Pump

Features:

- Inlet Nozzle Dimension: 2-1/2" - Outlet Nozzle Dimension: 2-1/2" - Power Voltage: 110V / 60Hz - Speed: 3,450 RPM - Flow Rate: 150 Liters/Min - 3/4 HP Heavy Duty Motor - Dynamic Head up to 240Ft / Suction Lift Up To 24Ft - Fluid Temperature Up To 140 Degree F. - Maximum Ambient Temperature 104 Degree F. - Rustproof Paint Housing - Mounting Base For Fix or Portable Pumping Capability - For Domestic, Industrial, And Agricultural Usage

5.5HP 2" Trash Water Pump [09060257]

Suitable For All Powering Industrial, Agricultural Machines, Emergency Flooding Or Around The Home Use. Featuring A Light Weight, Portable Size, SMOOTH RUNNING MOTOR AND EASY MAINTENANCE.

Features:

4 Stroke Gasoline Powered 5.5 HP, OHV, Overhead Valve "EPA" Motor Pumps 36 cubic meters and hour Max. Output: 5.5HP @ 4000RPM Oil Alert System (AUTO SHUT-OFF AT LOW OIL LEVEL) Lifts Up To 133 Feet / Suction Height Of 35 Feet Large Muffler Provides Quiet Operation @ 68 db Tank Capacity: 0.6 gallon 2.7 Hours continuously With A Full Tank Of Gas

Submersible Clean Water Pump C23 [09000509]

1/2HP Clean Submersible Water Pump designed for private use around your house and garden. This submersible water pump is predominantly used for drainage after flooding, transfer of liquid, draining containers, taking water from wells and shafts, draining boats and yachts as well as for water aeration and circulation for a limited period of time. The pumps are fully submersible (waterproof sealed) and can be submerged down to a depth of 5m into the liquid.

Liquids which can be handle by this subersible water pump are the following clean or slightly contaminated water (max. particle size 5 mm), swimming pool water (prerequisite is the recommended dosage of additives) and soapy water.

Functional Parts:

Power cable Carrying handle Float switch lock Vent valve Float switch Suction base Universal fitting Cross recessed head screw Turbine Universal Fitting - 1/2" (13 mm) - 5/8" (16 mm) - 3/4" (19 mm) - 1" (25 mm)

Technical Data: Complete plastic structure, antirust, corrosion-resistant, suitable for transferring clean water.

Pump body Plastic Impeller ABS (noryl if required) Motor Closed, externally ventilated Insulation class B (Class F if required) Protection class IP68 Duty Continuously rated Mechanical seal steatite/metalized carbon Shaft Staninless steel Thermal Protector Length of Power Cord 19 Ft 1 Inch

Submersible Dirty Water Pump C26 [09000612]

1/2HP Dirty Submersible Water Pump designed for private use around your house and garden. This submersible water pump is predominantly used for drainage after flooding, transfer of liquid, draining containers, taking water from wells and shafts, draining boats and yachts as well as for water aeration and circulation for a limited period of time. The pumps are fully submersible (waterproof sealed) and can be submerged down to a depth of 5m into the liquid.

Functional Parts:

Power cable Carrying handle Float switch lock Vent valve Float switch Suction base Universal fitting Cross recessed head screw Turbine Universal Fitting - 1/2" (13 mm) - 5/8" (16 mm) - 3/4" (19 mm) - 1" (25 mm)

Technical Data: Complete plastic structure, antirust, corrosion-resistant, suitable for transferring clean water.

Pump body Plastic Impeller ABS (noryl if required) Motor Closed, externally ventilated Insulation class B (Class F if required) Protection class IP68 Duty Continuously rated Mechanical seal steatite/metalized carbon Shaft Staninless steel Thermal Protector