Model Number: SD208P
The Cisco SD208P 8-Port 10/100 Switch; a Cisco Small Business Unmanaged Switch; offers the performance and ease of use you need to get your business connected. Just plug in your Ethernet cables; connect a power cord; and go�?there�?TMs no software to configure. Use this switch to connect PCs; printers; and network storage to your network. Built-in Power over Ethernet lets you power wireless access points and video surveillance cameras directly over the cable connection. The Switch provides non-blocking; wire speed switching for your 10 and 100 megabit network clients. All ports have automatic MDI/MDI-X crossover detection; so you don't have to worry about the crossover cable type. Each port independently and automatically negotiates for best speed and whether to run in half- or full-duplex mode. Address learning and aging is supported; as well as 802.3x flow control with head-of-line blocking prevention to keep your high-speed clients from bogging down in lower-speed traffic. Fast store-and-forward switching prevents damaged packets from being passed on into the network. The SD208P supports IEEE 802.3af Power over Ethernet on four ports; providing power over Cat-5 cabling to PoE end devices; such as wireless access points; IP phones or other PoE powered devices; to help eliminate need for dedicated electrical outlet. The Switch has a built in feature to aid network performance at times of excessive load. It is called Port Priority. It integrates Port Based QoS on all 8 ports to meet different service requirement on voice; video and data transformation. This feature can be useful during excessive loads; for example; when one type of traffic may require priority over another. World-class Cisco reliability and the limited lifetime warranty give you peace of mind and the new ultra-compact case design is sure to fit into your workgroup environment. Let the SD208P Switch kick your network into high gear.